ITI Knowledge Base

Setup Checklist - Desktop Station

Make sure you check all the boxes and get started on your ITI VR training journey!

Power

  1. ☐ Laptop power cable
  2. ☐ Sim hardware power cable
  3. ☐ Cables plugged into clean power outlet

Sensors

  1. ☐ Sensor lens clean and undamaged
  2. ☐ (if pre-calibrated) Left / Right sensors identified
  3. ☐ Sensor securely fastened to rod
  4. ☐ Sensor straight and centered towards operator

Cables

  1. ☐ Arm-to-arm USB cable [embedded]
  2. ☐ Arm-to-arm power cable [embedded]
  3. ☐ Sensor cable [right side]
  4. ☐ Sim USB cable [right side]
  5. ☐ Oculus HDMI cable [left side]
  6. ☐ Oculus USB cable [left side]
  7. ☐ HDMI to Mini-Display Port display cable [left side]

VR Headset

  1. ☐ Cable not showing cuts or other damage
  2. ☐ Lenses clean
  3. ☐ Screen displaying properly
  4. ☐ Confirm no visual lag/latency with movement

Secure Hardware

  1. ☐ Desktop arms securely clamped [not wiggling]
  2. ☐ Controller pods securely fastened [not wiggling]

Laptop

  1. ☐ Oculus app running [minimized]
  2. ☐ Sim configuration selected
  3. ☐ Controllers functioning in Controller Utility
  4. ☐ Close unnecessary software [if any]
  5. ☐ Launch and calibrate simulator!