Barnhart is expanding and has recently opened three new offices in Charleston, SC, Owensboro, KY, and Richland, WA. READ MORE. (Source: wireropeexchange.wordpress.com)
Training
Crane Training
ITI conducts a variety of crane training courses that support end-users from operators to inspectors, and assembly/disassembly directors on all crane types including mobile (all variations), overhead, articulating boom, pedestal, and tower. Under the broader category of Cranes, courses are further classified into the following sub-categories:
Crane Operator
Operator training from ITI encompasses options for all operator skill and experience levels on all crane types used in construction and general industry.
Crane Inspection
Pre-operation, MESH (mechanical, electrical, structural and hydraulic) components, and applicable federal, state/provincial regulations and standards highlight ITI Crane Inspection curriculum.
Crane Technician & Maintenance
ITI Crane Technician & Maintenance curriculum covers overhead and tower cranes.
Certification Prep & Exams
ITI endorses the national certification program offered by the National Commission for the Certification of Crane Operators (NCCCO) and provides training to prepare candidates for NCCCO written and practical exams. Exam administration with Certified Practical Examiners (ITI Instructors) is also offered. Certification prep and exams is offered for mobile crane operators, overhead crane operators, and articulating boom crane operators.
Rigging Training
ITI has been an innovator and pioneer in rigging training for nearly 30 years and conducts more rigging training for corporate clients in North America than any other provider due to its expertise, size of training staff, and deep course curriculum. Under the broader category of Rigging, courses are further classified into the following sub-categories:
Rigging Applications
The “meat and potatoes” of rigging training. ITI Rigging Applications courses cover the full gamut of skill and experience levels with options available for true neophytes to seasoned veterans and everyone in-between…
Rigging Inspection
Removal criteria for wire rope, wire rope slings, synthetic web/round slings, chain slings, rigging hardware, and below-the-hook lifting devices is the focus here. Personnel qualification is available.
Rigging Certification Prep & Exams
ITI endorses the national certification program offered by the National Commission for the Certification of Crane Operators (NCCCO) and provides training to prepare candidates for NCCCO written and practical exams. Exam administration with Certified Practical Examiners (ITI Instructors) is also offered.
Rigging Engineering
Designed for lift planners, crane and rigging managers, and other non-engineers who conduct lift planning activities, ITI’s Fundamentals of Rigging Engineering courses are LEEA accredited and approved by ASME.
Signalperson Training
ITI offers signalperson training for personnel who use hand and voice signals in crane operations. Qualification and Certification Exams through NCCCO are offered.
Lift Planning & Management Training
ITI Lift Planning and Management Training is applicable to a wide range of personnel, from health and safety professionals to tradesmen in the field. Under the broader category of Lift Planning & Management, courses are further classified into the following sub-categories:
NCCCO Certification
ITI endorses the national certification program offered by the National Commission for the Certification of Crane Operators (NCCCO) and provides training to prepare candidates for NCCCO written and practical exams. Exam administration with Certified Practical Examiners (ITI Instructors) is also offered. ITI offers NCCCO certification prep courses for the following programs:
Operator Certification
Operator certification for the following crane and equipment types - Mobile, Overhead, Articulating Boom, Digger Derrick
Rigger & Signalperson Certification
Rigger I, Rigger II, Signalperson
Safety Training
ITI's Industrial Safety Training Library contains over 120 topics and provides your employees with essential - and often mandated - safety skills pertaining to general health and regulatory compliance. ITI Safety Courses includes content originally developed by partner organization that can be further classified into the following sub-categories:
OHSA 10 & 30 Courses
The 10-hour course is designed for entry-level workers and includes a general overview of common safety and health hazards. The 30-hour course is designed for supervisors or workers with some safety responsibility and covers a much wider range of topics.
MSHA Training
Part 46 of Mine Safety and Health Administration (MSHA) regulations requires that new miners complete no less than 4 hours of training before they enter a mine site and that all miners take refresher training on an annual basis.
General Safety Training
From distracted driving to industrial ergonomics, preventing fires to reducing stress, our General Safety products address issues that affect employees in their day-to-day job functions so they can start to work better… and safer.
Toolbox Talks & Micro-Courses
Toolbox Talks are an effective way to refresh workers’ safety and health knowledge as well as to promote safety culture daily.
Content Partners
ITI has curated a library of eLearning content from industry leading training companies and original equipment manufacturers, and associations, to create the largest library of crane and rigging specific training content in one place.
Original Equipment Manufacturers (OEMs)
Content from Broderson, Demag, Liebherr, Link-Belt, Manitowoc, Tadano, and more OEMs!
Rigging Hardware Manufacturers
Content from Crosby, GKS, Verton, and Water Weights...
Load Handling Specialty Products
Content from GKS, Hydra-Slide, LGH, Verton, and more!
Industry Associations and Certification Organizations
NCCCO, SC&RA and more!
COMMENTS