ITI to Offer Tower Crane Training Through Morrow Equipment

ITI to Offer Tower Crane Training Through Morrow Equipment

Woodland, Washington – Effective immediately, Industrial Training International (iti.com) will offer Tower Crane Training Courses through an alliance with Morrow Equipment, at their state of the art training center in Salem, Oregon. Courses include management, safety & inspection, technician, and national operator certification training.


Tower Crane Operator – NCCCO Nationally Accredited Certification

This course provides training to prepare candidates for NCCCO certification examinations. Certification requirements include written examination, practical examination, physical requirements, and a recertification requirement. For more information, to register, or to contact an ITI Training Solutions Associate visit - http://www.iti.com/nccco-certified-tower-crane-operator-training.

Tower Crane Management

Tower Crane Management is a 2-day course covering a wide range of areas including crane applications, project planning, and operation and maintenance requirements. Course Subjects include:product-intro-luffing-boom-542-HC-L_3

 

  • Tower Crane Applications
  • Tower Crane Configurations
  • Project Planning
  • Crane Operations
  • Site Preparation Requirements
  • Counterweight and Ballasting Requirements
  • Safety and Accident Prevention
  • Electrical Power Supply and Grounding
  • Loading and Transport of Crane Components
  • Erection and Dismantle Procedures
  • Top Climbing and Crane Anchorage
  • Bottom Climbing and Crane Support
  • Rail Traveling Requirements
  • Automatic Overload Safety Systems
  • Maintenance, Inspection, and Record Keeping
  • Applicable Safety Standards and Regulations

For more information, to register, or to contact an ITI Training Solutions Associate visit - http://www.iti.com/tower-crane-management-training.

Tower Crane Safety & Inspection

Safety and Inspection is a course covering general tower crane knowledge. This 3-day course is aimed at those involved in inspection and safety compliance for tower cranes. Course subjects include:equipment-maintenance

  • Erection & Dismantling
  • Climbing Systems
  • Tower Crane Drive Technology
  • Overload Systems
  • Limit Switches
  • Bolting Requirements
  • Certification Procedures
  • Load Testing
  • Tower Crane Communications
  • Structural Inspection
  • Foundation Requirements
  • Transport
  • Anchorages and Recognizing Electrical Hazards
  • Hands-on Field Inspections of Working Tower Cranes

For more information, to register, or to contact an ITI Training Solutions Associate visit - http://www.iti.com/tower-crane-safety-inspection-training.

Tower Crane Technician

Prerequisite: Tower Crane Safety & Inspection or equivalent training or experience. Morrow Equipment can also provide consent in some circumstances.

This 5-day advanced course in tower crane service is intended for dedicated service personnel with advanced knowledge of tower crane mechanical and electrical system troubleshooting and repair. The course combines theory and practice using audiovisual presentations with hands-on training utilizing fully functional crane components. Course Subjects include:quality-assurance

  • Tower Crane Classifications
  • Configuration and Applications
  • Electrical Power Supply & Grounding
  • Structural Bolting Installation & Inspection
  • Top Climbing/Bottom Climbing Procedures Review
  • Climbing Support & Anchorage
  • Tower Crane Drive Systems
  • Counterweights & test Weights
  • Tower Crane Electrical Schematics Basics
  • Basic Fault Tracing
  • Crane Controls & Functions
  • Work Area Limitation Systems
  • Safety & Accident Prevention
  • General Inspection & Maintenance
  • Applicable Safety Standards and Regulations

For more information, to register, or to contact an ITI Training Solutions Associate visit - http://www.iti.com/tower-crane-technician-training.

Morrow is the exclusive distributor of Liebherr manufactured tower cranes in the United States, Canada, Australia, and New Zealand. In addition, Morrow represents Liebherr harbor mobile and container gantry cranes in Australia and New Zealand. Morrow also is a representative of Alimak Scando construction hoists, complimenting Morrow cranes for complete work site coverage.

Morrow has 25 locations in six countries including the United States, Canada, Mexico, Australia, New Zealand, and Brazil. Morrow international headquarters and the Morrow Training Center is located in Salem, Oregon.

Canadian Hoisting & Rigging Safety Council, LEEA and other industry groups work together to promote best practices at CRC Canada
Heavy Transport Horror Stories (And Successes Too!)

About Author

Industrial Training International
Industrial Training International

Cranes | Rigging | Lift Planning | Engineering | VR Simulation

Related Posts
Crane & Equipment Operators Have a New App to Log Shifts, Activities & OSHA Operator Evaluations
Crane & Equipment Operators Have a New App to Log Shifts, Activities & OSHA Operator Evaluations
DICA to Show New Cribbing and Pad Products at ICUEE 2019
DICA to Show New Cribbing and Pad Products at ICUEE 2019
ITI VR Crane Simulator Joins Oracle Construction and Engineering Innovation Lab
ITI VR Crane Simulator Joins Oracle Construction and Engineering Innovation Lab

Comment

Subscribe To Blog

Subscribe to Email Updates