Skip to content
Close
PHONE HOTLINE: 800.727.6355 E-MAIL: info@iti.com
IMG_2444_1920

ITI News

News updates, technical and product information from ITI

Apr 20, 2011 8:11:00 AM < 1 min read

Rigging Training Workshop: Off-level Pick Points (uneven elevation)

A special condition arises when lifting a load whose pick points are not on the same ...
Start Reading
Apr 19, 2011 9:21:00 AM 1 min read

Rigging Training Workshop - Rigging Selection: Tension & Sling Size

Some loads can be single point picked, and the rigging is selected based on suspended ...
Start Reading
Apr 13, 2011 6:42:00 AM < 1 min read

Rigging Training Workshop - Rigging Selection (sheave blocks)

Circle the best answer for each system which matches the illustrations at the right.
Start Reading
Apr 11, 2011 8:59:00 AM < 1 min read

Rigging Training Workshop - Load Control

Identify the rigging method below which provides the best load control of the two hitch ...
Start Reading
Apr 6, 2011 8:32:00 AM < 1 min read

Rigging Training Workshop - Rigging Selection

Rig from the bottom up. Select the correct rigging for the load below using the Master ...
Start Reading
Apr 5, 2011 8:35:00 AM < 1 min read

Rigging Training Workshop: Off-set CG, Sling Length Estimate

Once in a while we are faced with a rigging challenge that requires us to go back to a² + ...
Start Reading
Mar 30, 2011 8:23:00 AM < 1 min read

Rigging Training Workshop: Off-level Pick Points

When a load's lifting points are not on the same plane or elevation, the tension in each ...
Start Reading
Mar 23, 2011 6:34:00 AM < 1 min read

Rigging Training Workshop: What's Under-Rigged?

Identify the rigging that does not have sufficient rated capacity for the load. If ...
Start Reading